Precor Vitality Series Pulldown C002ES
Precor Vitality Series Pulldown C002ES
Precor Vitality Series Pulldown C002ES
Details
The Vitality Series Pulldown features dual-pulley handles with user-defined and independent motion for workout variety. Ratcheting seat adjustment allows for desired pre-stretch. Fixed thigh pads at an optimal height for all users ensures less maintenance. Users can engage the add-on weight with a simple push of a lever to increase work load.
Features
General Features | Dual-pulley handles with independent and user-defined motion. Optional lat pulldown bar available. Weight Stack 220 lbs (100 kg). |
Instructional Placard | Step-by-step instructions for users of all levels to help with setup and exercise, including tips to help maximize workouts. |
Adjustments | Seat and back pad adjustments feature custom-molded sleeve-tube inserts inside attractive oval-shaped steel tubing. Ensures stable, low-friction seat adjustments. Ratcheting seat adjustment with push-to-release lever is color-coded for easy identification. Viewing hold and etched numbers on sleeve-tube for accurate positioning of seat and back pad. Hardened plunger and spring-loaded snap-pin assembly position adjustment with easy-grip pull-pin for smooth adjustment. Pull-pin is color-coded for easy identification. Slip-resistant rubber grip handle assembly with machine alloy end-cap. Push grips are over-sized to 1.5 inch (39 mm) diameter. Pull grips and handlebars are 1.25 inch (32 mm) diameter. |
Weight Stack | Weight plates are 1 inch (25 mm) thick, machined cast weight plates in 10 lb (5 kg) and 15 lb (7 kg) sizes, with fitted nylon bushings to ensure smooth travel on guide rods. Top weight plate is machined cast weight plate designed for a 10 lb (5 kg) starting weight (25 lbs / 11 kg on the Leg Press). Precision, lubricated bushings for smooth operation. The magnetic weight selection pin assures positive locking to plates and is secured to weight stack with a thick plastic-coated tether cable. Weight selection pin is color-coded for easy identification. Guide rods are 3/4 inch (19 mm) diameter steel, polished with corrosion-resistant plating for smooth operation and rust prevention. Cables are military spec 5 mm cable (Leg Press: 6.3 mm) coated. Custom end fittings tested to 250,000 cycles under a 4440 lb (200 kg) load. Six machines require no removal of pulleys to route cable. For the other 7 machines all pulleys are pre-assembled, so removal, routing and replacing the pulleys is easy - no hunting for the right pulleys, pulley cover and pulley-mounting hardware. Low starting weight and full weight range accommodate a wide range of users. Weight stack is easily accessible from the seated position. Full-length translucent shrouds enclose the back of the weight stack. Front shroud is full-length with a 3 inch (75 mm) wide slot for access to the weight selection pin. Slotted front shroud meets ASTM and EN0957 safety standards. |
Frame and Finish | 11 gauge (2.75 mm) 2x4-inch (50 x 100 mm) tubing is bent electroweld steel. Finish is electrostatically applied, heat-cured powder coat for superior durability. Frame available in Experience Titanium (metallic industry silver). |
Upholstery | Fabric is premium-quality industrial vinyl with a protective coating that results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Construction features a 4-piece design with a 3/4 inch thick plywood back, 3/4 inch high-density foam base, 3/4 inch high-density foam core and industrial fabric cover. Total thickness is 2.5 inches (65 mm). |
Pulleys and Cables | Glass-fiber-reinforced nylon pulleys with deep V-groove provide secure cable seating and fluid bearing rotation. Cables are military spec 5 mm cable coated. |
Bearings and Pivot Points | ABEC-rated sealed bearings for smooth feel and added durability. |
Water Bottle and Accessories Holder | Top cap secures the front and back shrouds and includes an accessories shelf and 4 inch (102 mm) diameter water bottle holder. |
Rubber Feet | Yes |
Specifications
Weight Stack | 220 lbs / 100 kg |
Add-on Weight Stack (lbs / kg) | 7.5 lbs / 3.5 kg |
Workout Area (L x W) | 76 x 127 inches / 193 x 323 cm |
Standard Frame Colors | Gloss Metallic Silver |
Standard Upholstery Colors | Black |
Optional Upholstery Colors | All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate |
Equipment Dimensions and Weight
Length | 56 inches / 142 cm |
Width | 51 inches / 130 cm |
Height | 88 inches / 224 cm |
Equipment Weight | 433 lbs / 197 kg |
Shipping Dimensions and Weight
Length | 87 inches / 221 cm |
Width | 52 inches / 132 cm |
Height | 43 inches / 109 cm |
Shipping Weight | 591 lbs / 268 kg |
Regulatory
EN957 | Yes |
ASTM | Yes |
Manufacturer reserves the right to change or alter specifications at any time. Precor protects its product by vigorously enforcing its patent, trademark, copyright and other applicable intellectual property rights in the USA and in other countries. Precor is a registered trademark of Precor Incorporated.
Warranty
FRAME:10 years, PARTS (MECHANICAL):5 years, WEAR ITEMS:6 months, OTHER (INCLUDING HAND GRIPS, END CAPS, CABLES, SELECTOR PINS, SHROUDS):1 year, LABOR:1 year
Reviews
Write Your Own Review
Leasing Options
We can custom tailor a leasing package to fit your space, budget, and time table.
Learn MoreWarranty Plans
Our Product Protection Plan offers you more protection through extended coverage periods at an affordable cost.
Learn More